Mikrotron MC132x Dokumentacja

Przeglądaj online lub pobierz Dokumentacja dla Aparaty z pseudo lustrem Mikrotron MC132x. Mikrotron MC132x Specifications Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj

Podsumowanie treści

Strona 1

MC132x High Speed CMOS GigE Vision Camera Mikrotron GmbH Landshuter Str. 20-22 D-85716 Unterschleißheim Germany Tel.: +49 89 726342 00 Fax: +49 89

Strona 2 - Table of contents

Getting started MC132x Users Manual Rev. 0.22 10 4 Getting started Before starting to operate the camera, make sure that the following equipment i

Strona 3

Initial setup MC132x Users Manual Rev. 0.22 11 5 Initial setup The MC132x is delivered with initial parameters and therefore does not need to be c

Strona 4 - 1 General

Configuration MC132x Users Manual Rev. 0.22 12 6 Configuration The MC132x has 15 FPGA registers, r1..rfh , each 10 bit wide, eight D/A registers,

Strona 5

Configuration MC132x Users Manual Rev. 0.22 6.1.1 Table of commands Syntax Range Answer Description :a<n><xx> <n> = 1...8 <xx&

Strona 6

Configuration MC132x Users Manual Rev. 0.22 6.2.2 Read identifier The identifier offer information about the camera type and camera functions. It cons

Strona 7 - 2 Introduction

Configuration MC132x Users Manual Rev. 0.22 6.2.4 Reading camera temperature To control the temperature inside , the camera disposes of an internal t

Strona 8 - 2.4 Using the camera

Configuration MC132x Users Manual Rev. 0.22 16 6.3.3 Load factory profile The eight factory profiles can be read but not changed by the user. Com

Strona 9 - 3 Hardware

Configuration MC132x Users Manual Rev. 0.22 17 6.5.1 Address of the first line Register r1 defines the first line to be displayed. Command: :r1

Strona 10 - 4 Getting started

Configuration MC132x Users Manual Rev. 0.22 18 6.5.5 Tracking For rapid window movement even at slow baud rates a short command is provided.. comm

Strona 11 - 5 Initial setup

Configuration MC132x Users Manual Rev. 0.22 This is valid for a line length between 250 and 640 pixel. command :s <x0> <x0> ... range

Strona 12 - 6 Configuration

General MC132x Users Manual Rev. 0.22 2 Table of contents 1 General...

Strona 13 - 6.2 Read camera information

Configuration MC132x Users Manual Rev. 0.22 20 6.7.1.2 Asynchronous exposure With asynchronous exposure, an external signal starts exposure, and th

Strona 14

Configuration MC132x Users Manual Rev. 0.22 21 6.7.3 Synchronous operation without shutter Without electronic shutter the exposure time is 1 / fra

Strona 15 - 6.3 Profile processing

Configuration MC132x Users Manual Rev. 0.22 22 6.7.6 Frame rate with asynchronous exposure The frame rate with asynchronous exposure = Frame rate

Strona 16 - 6.5 Image size and position

Configuration MC132x Users Manual Rev. 0.22 23 The application program is the active microcontroller program in the camera, which supports communi

Strona 17

Configuration MC132x Users Manual Rev. 0.22 24 (6) Verify version string by reading serial no. and firmware versions (command: :v). The new firmw

Strona 18 - 6.6 Clock selection

Configuration MC132x Users Manual Rev. 0.22 25 The gray levels along the center line of the image are saved in volatile memory and then subtracted

Strona 19 - 6.7 Exposure control

Configuration MC132x Users Manual Rev. 0.22 26 MC132x has a 16-Bit image counter whose count can replace the first two pixel of every image. The im

Strona 20 - ... Sensorclock

Configuration MC132x Users Manual Rev. 0.22 6.17.2.1 Address of trigger line The register rCh determines the vertical position of the trigger line in

Strona 21

Configuration MC132x Users Manual Rev. 0.22 28 1: pixel gray level < threshold level, trigger line not visible 2

Strona 22 - 6.8 Firmware

Configuration MC132x Users Manual Rev. 0.22 29 6.17.3 ImageBLITZ® registers Register Bit Description r7 0 = 1: activate ImageBLITZ® r8 6..0 Fir

Strona 23

General MC132x Users Manual Rev. 0.22 3 6.7.3 Synchronous operation without shutter ...

Strona 24 - 6.10 Vertical pixelbinning

MC13xx configuration tool MC132x Users Manual Rev. 0.22 7 MC13xx configuration tool The MC13xx configuration tool must be installed on a Windows PC

Strona 25 - 6.16 Image counter

MC13xx configuration tool MC132x Users Manual Rev. 0.22 7.2 ImageBLITZ® Configuration 1st Col, Num Of Col., Row ( Position of TriggerLine ): r8, r

Strona 26

Mechanical dimensions MC132x Users Manual Rev. 0.22 8 Mechanical dimensions 8.1 Camera body MC132x The camera body has (without lens) has very comp

Strona 27

Mechanical dimensions MC132x Users Manual Rev. 0.22 8.1.3 Dimensioned drawing, front view of MC1324/25 63mm63mm 8.1.4 Dimensione

Strona 28

Mechanical dimensions MC132x Users Manual Rev. 0.22 8.1.5 Dimensioned drawing, rear view of MC132x 2235.842.80.9 8.2 Lens adju

Strona 29

Technical Data MC132x Users Manual Rev. 0.22 35 9 Technical Data MC1324 MC1326 MC1325 MC1327 Monochrome Bayer Filter Number of pixel 1280 x 1024

Strona 30 - 7.1 Basic Configuration

Technical Data MC132x Users Manual Rev. 0.22 9.1 Spectral response 36

Strona 31

Technical Data MC132x Users Manual Rev. 0.22 9.2 Sensitive area of a pixel Pixel size: 12 x 12 µm Fill factor: 40 % Sensitive area: 10,5 x

Strona 32 - 8 Mechanical dimensions

Technical Data MC132x Users Manual Rev. 0.22 9.3 Connector pinning 9.3.1 Gigabit Ethernet Connector 9.3.2 Circular power connector, 12-pin pin

Strona 33

Technical Data MC132x Users Manual Rev. 0.22 39 9.4 Frequency selection Depending on the selected line length and the datarate of the GigE interfa

Strona 34 - 8.2 Lens adjustment

General MC132x Users Manual Rev. 0.22 4 alfunc-s us-1 General 1.1 For customers in the U.S.A. This equipment has been tested and found to comply

Strona 35 - 9 Technical Data

Technical Data MC132x Users Manual Rev. 0.22 40 Frequency / MHz Code Frequency / MHz Code Frequency / MHz Code Wanted Real Wanted Real W

Strona 36 - 9.1 Spectral response

Technical Data MC132x Users Manual Rev. 0.22 41 9.4.1.1 Respective codes for the clock synthesizer Each frequency pair corresponds to two hexade

Strona 37 - Sensitive Area

Technical Data MC132x Users Manual Rev. 0.22 42 9.5 Programming sequence, factory profile f3 Example: resolution: 1.280 x 1.024 pixel frame ra

Strona 38 - 9.3 Connector pinning

Technical Data MC132x Users Manual Rev. 0.22 9.6 Timing 9.6.1 Pixel clock FVAL LVAL Data tdh = 4.5 ±1 ns Pixel clock Tclk, 12..~200ns T

Strona 39 - 9.4 Frequency selection

Technical Data MC132x Users Manual Rev. 0.22 9.6.3 Frame Valid (FVAL) 44 The rising edge of FVAL marks that line, that is programmed in Re

Strona 40

Technical Data MC132x Users Manual Rev. 0.22 9.6.5 Synchronous exposure with external synchronisation via TRIG texp(n)Image (n-1)texp(n+1)Image (n

Strona 41

General MC132x Users Manual Rev. 0.22 5 1.5 Declaration of conformity Manufacturer: Mikrotron GmbH Address: Landshuter Str. 20-22 857

Strona 42

General MC132x Users Manual Rev. 0.22 6 1.6 Warranty Note Do not open the body of the camera. The warranty becomes void if the body is opened. 1.7

Strona 43 - 9.6 Timing

Introduction MC132x Users Manual Rev. 0.22 7 2 Introduction The CMOS high speed camera MC132x is a high resolution camera with 1280 x 1024 pixel.

Strona 44

Introduction MC132x Users Manual Rev. 0.22 2.3 Differences between the camera types The CMOS cameras are available in different versions depending o

Strona 45

Hardware MC132x Users Manual Rev. 0.22 9 3 Hardware 3.1 GigE Vision® Interface GigE Vision® is designed for digital cameras in machine vision app

Komentarze do niniejszej Instrukcji

Brak uwag